Tijaria Polypipes Ltd. introduces inline emitting pipe system for better irrigation of plants at very low cost and with scarce of water. This product confirms to Indian Standards as per IS:13488 & IS:12786. This is an integral pipe system (in-built) in which the emitters are inserted in the laterals during the extrusion process at preset distances.
SALIENT FEATURES:
High clog resistant emitter designed with a unique wide turbulent flow path.
Large surface inlet screen orifice.
Two orifice outlets placed 1800 apart at each dripper end.
The additional outlet reduces the suction hazard from sand particles when the laterals are drained.
Easy to roll and unroll during inter cultivating operations, thus reduces chances of mechanical damage without losing drippers.
Uniform emission rate along the lateral.
Available in wide range of emitter spacing form 20 to 150 cm as per customer's need.
INSTALLATION:
Quick and easy to install: Just unroll and lay the lateral to the reduce time and cost.
No need of punching the drippers on the lateral.
Can easily be connected to the PVC/HDPE pipe by means of head connector.
SPECIFICATIONS:
Diameter (mm)
Class
Pressure rating (Kg/cm2)
Average wall thickness (mm)
12
3
2.5
1.1
3
4.0
1.2
16
1
1.0
0.8
2
1.25
0.9
3
2.5
1.3
Recommendations: Maximum recommended drip line length in meters on flat terrain at a pressure of 1 kg/cm2 diameter 12 mm & 16 mm.
Dripper Spacing (mm)
20
30
40
50
60
75
90
100
150
Maximum Extendable Lateral Length
16mm
2LPH
40
62
72
89
102
116
127
146
188
16mm
4LPH
25
35
44
52
59
70
78
85
111
12mm
2LPH
22
31
38
46
53
63
71
77
103
Operating Range: Working pressure range:0.7 kg/cm2 to 2.25 kg/cm2.
APPLICATION: All field crops like sugarcane, cotton, strawberry, grapes, carnations, floriculture, banana, pineapple, vegetables, tea gardens, green houses etc.
